Hohm Work V2 18650 Battery

Specs:
Capacity: 2547mAh
Max Charge Rate: 3.82A
Max Charge Voltage: 4.2V
Continuous Discharge Rate: 25.3A
Max 80oC | 3.2V cut-off: 35.8A
Pulse | Peak*6: 42.4A
Max Safe Cut-Off: 2.5V
Cycle Life Retention: 500 Cycles (69%), 1000 (58%)
Chemistry Type: QSP Li-NMC

Say hello to the successor of the Hohm Work 18650… we proudly introduce the updated Hohm Work2. Phenomenal sustained amperage and voltage delivery under heavy load in a 18650 cell. These are rated by Indonesia Chemistry at 2547mAh capacity, with a CDR of 25.3A, and 80oC | 2.8V cut-off @ 35.8A. For EV and DC motor applications, easily initial power with its 42.4A pulse/peak rating*6. All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr (See 1 Below), TID (See 2 Below), PVDL (See 3 Below), CLR (See 4 Below), mΩR (See 5 Below), and Temperature (°C). Hohm Work2 is built with a Cobalt Oxide with proprietary melding of copper, aluminum, ethylene carbonate chemistry concentration, to achieve unprecedented capabilities.
 
Every Hohm Tech cell model has been tested and certified by UN38.3, EN62133, IEC62133 2nd Edition, and UL1642 accredited laboratories and testing facilities assigned by regulatory bodies. This includes MSDS, CE, ROHS, UN38.3, IEC, PSE, Specifications, and Air/Sea Transport certifications. We do not cut corners. We deliver what we promise… chart-topping performance, capacity, consistency, and safety.

*NOTICE: Hohm Tech does not manufacture batteries. These are made for and licensed to Hohm Tech Int’l achieving their requirements set forth.

*CAN BE CHARGED AT 4.43A. This is not a misprint. 4.43A as in FOUR POINT FOUR THREE-amp charging is possible, tested, proven, and approved within all strict safety protocols set by Indonesia Chemistry.

*TESTING BEYOND TEMPERATURE. Hohm Tech cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.

WARNING: LI-ION CELLS HAVE INHERENT RISKS IF MISUSED OR MISHANDLED. CELL CAN EXPLODE CAUSING SEVERE BURN INJURY, FATALITY, AND PROPERTY DAMAGE.  – READ BELOW THOROUGHLY –

KEEP OUT OF REACH of anyone under 21 years of age, AND pets.

DO NOT PUT IN FIRE, oven, microwave, or expose to anything over 100oC (212oF)
DO NOT CARRY or store OUTSIDE of its protective packaging or a PROTECTIVE CELL CASE.
DO NOT PUT IN POCKET, bag, purse, or anywhere WITH METAL OBJECTS including COINS and KEYS. Otherwise, cell(s) could short-circuit and explode.
DO NOT PUT A DEVICE WITH CELL(S) INSTALLED IN POCKET or ON YOUR BODY. As unlikely as it may be, a device can malfunction, have a defect, internal damage, and/or be affected by conductive debris or object(s) in pocket that can overload or short-circuit cell causing it to explode.
DO NOT USE IN A DEVICE THAT CAN EXCEED MAX CELL WATTAGE (W) or AMPERAGE (A) (listed on each cell and retail packaging). Otherwise, this can overload a cell, causing it to explode.
DO NOT USE A LOWER RESISTANCE (Ω) # (listed on each cell and retail packaging). Otherwise, this can overload cell, causing it to explode.
DO NOT USE CELL WITH ANY DAMAGE TO ITS STRUCTURE OR OUTER PROTECTIVE LABEL (also called “WRAP”, “sleeve”, “skin”). Damage may include: dent(s), tear(s), nick(s), puncture(s), corrosion, or any other undisclosed abnormalities or damages. Otherwise, a cell can short-circuit and explode. ALWAYS INSPECT cell VISUALLY and by TOUCH to SEE/FEEL for damage BEFORE EACH USE. ** SEE ILLUSTRATION BELOW AS GUIDELINE. **
DO NOT LEAVE UNATTENDED WHILE CHARGING, & REMOVE CELL(s) FROM CHARGER ONCE FULLY CHARGED to ensure it is not exposed to any potential charger malfunction such as overcharging it could damage cell causing it to explode.
DO NOT CHARGE HIGHER THAN MAX CHARGE VOLTAGE (V) (typically 4.2V) or DISCHARGE BELOW MAX VOLTAGE CUT-OFF (V) (typically 2.5V). Overcharging or over-discharging cell(s) can cause irreversible damage and cause it to explode.
DO NOT MIX WITH USED or DIFFERENT BATTERY TYPES. Differences in cell capacity can lead to one or more cell(s) being overcharged or over-discharged.
IF USING A MULTI-CELL DEVICE, the device MUST HAVE A NON-CONDUCTIVE BARRIER (typically plastic) OR FITMENT that PREVENTS CELL(S) from TOUCHING THE SIDE(S) OF ONE ANOTHER OR ANY ADJACENT METAL except for the very center of top and bottom of the cell. Otherwise, cell(s) could short-circuit and explode.
ALWAYS use, connect, charge, and operate cell(s) within their capabilities as listed on each cell, packaging, and product detail pages, while adhering to the device’s user manual.

COMPLETELY READ and follow the WARNING section listed on each cell, packaging, and here, in its entirety.

SEARCH www.YouTube.com to understand the importance of consistently taking safety precautions and using Li-ion cells properly. Hohm Tech advocates recycling and replacing any damaged Li-ion cell/battery. As a tool to find your LOCAL RECYCLE CENTER. Or visit Hohm Tech Warranty Center for recycling and replacement. Your safety is #1.