ATTENTION

The products sold on the EmpireMods website are intended for legal adults ONLY.

By agreeing to these terms, you certify that you are of legal smoking age or at least 21 years of age if you reside in New York City.







Subscribe to our newsletter:


















  Home > Rebuildables/Tanks >

  Triangle Stainless Steel Rebuildable Atomizer



 
Alternative Views:


Triangle Stainless Steel Rebuildable Atomizer
Our Price: $12.99
Super Low Special!!! $8.99


Availability: Usually Ships in 24 Hours
Product Code: TRIREB
Qty:

Description
 

Triangle Stainless Steel Rebuildable Atomizer

The Triangle Stainless Steel Rebuildable Atomizer is the newest 510 style rebuildable to our site. It features a dual coil parallel style post in the form of a Triangle hence the name. Comes standard installed with 2 - 3.0ohm coils resulting in a 1.5ohm atomizer. There is a pin sized hole on the side of the lower assembly which draws air through the coil giving vasts amounts of vapor production. The bottom of the connection is sealed so it will not work for bottom feeder mods and should used strictly for dripping. The Triangle comes with a center spike attachment so you can use use 510-T cartridges as well. Any 510/901 style drip tip will work on the Triangle, simply remove screw attachment and you can drip directly into the coil. The Triangle also has a splash guard to prevent liquids from spitting back when dripping. Black plastic drip tip is included.
Info
  • While this is an accessory for the advanced user, we do have ready made coils with wicks already made and available for simple installation and immediate use. First trim off the excess wire and wicking to the length that works for you, simply loosen the two screws on the top of the posts, slide the coil ends through each of the side holes on the posts, get the coil as close to the posts without it touching either of them, then tighten the screws. Thread the middle tube with draw hole onto the base with coil attached then do the same with the top drip tip piece. You can now thread onto your device. For first use, we recommend saturating the wick and coil in juice so at least 7 drops of your choice of liquid. Put your drip tip on in the top and vape.

    You can source your own wire for coils and wicking material to make your own and even with our stock of pre-made coils with wicks, you will want to experiment and find the set up that works best for you, length of wicking for example.

    Please do take great care when installing your coils and do a lot of research on how to do anything with a rebuildable atomizer of any kind, use youtube, the forums and networks out there to find the answers, tips and tricks, there are some amazing and generous people out there and we will of course answer any questions you have and offer our guidance on what works best for us with rebuildables.


Average Customer Review: 4 of 5 | Total Reviews: 1 . Write a review


  0 of 0 people found the following review helpful:
 
I like this, it looks sharp on an ego December 27, 2013
Reviewer: SEAN  
I rebuilt it with a single 28 microcoil and cotton wick and it seems to be vaping very well at 1.7ohm. The bottom connector is adjustable with a flathead screwdriver. The splash guard is good, needed to remove the top to make it a dripper. Ceramic bottom.

Was this review helpful to you?


Browse for more products in the same category as this item:

Rebuildables/Tanks