ATTENTION

The products sold on the EmpireMods website are intended for legal adults ONLY.

By agreeing to these terms, you certify that you are of legal smoking age or at least 18 years old.







Subscribe to our newsletter:



For Product Updates
Follow Us On Twitter
And Facebook

  Home > Rebuildables/Tanks >

  A7 MINI Stainless Steel Rebuildable Atomizer Kit



 
Alternative Views:
A7 MINI Stainless Steel Rebuildable Atomizer Kit
Our Price: $21.99


Availability: Usually Ships in 24 Hours
Product Code: REBA7MINI
Qty:

Description
 

A7 MINI Stainless Steel Rebuildable Atomizer Kit

The little brother of the A7 has arrived!!! The new A7 MINI Stainless Steel Rebuildable Atomizer comes with a standard 510 native connection. The A7 MINI features a removable coil and wick held by 2 screws making it very easy to dismantle and rebuild with ease. The A7 MINI is designed for dripping and has great flavor and vapor production utilizing a single coil and wick. This Rebuildable Atomizer comes fully assembled with a 2.4ohm coil as well as 2 additional pre-made coils, A black anodized 510/901 drip tip, and a flat head screwdriver is also included inside the case. You can use most 510/901 style drips tip in conjunction with this rebuildable. The air is drawn from the bottom (not the side) of the 510 connection similiar to most standard atomizers in the market today. Please note that the A7 MINI has a adjustable center pin. If you see that your unit will not fire then you will need to adjust the center pin outwards to make a solid contact. (Available in Stainless Steel finish)
Info
  • While this is an accessory for the advanced user, we do have 1.8, 2.0 and 2.4ohm ready made coils with wicks already made and available for simple installation and immediate use. First trim off the excess wire and wicking to the length that works for you, simply loosen the two screws on the top of the posts, slide the coil ends through each of the side holes on the posts,  get the coil as close to the posts without it touching either of them, then tighten the screws. Thread the middle tube with draw hole onto the base with coil attached then do the same with the top drip tip piece. You can now thread onto your device. For first use, we recommend saturating the wick and coil in juice so at least 7 drops of your choice of liquid. Put your drip tip on in the top and vape.

    You can source your own wire for coils and wicking material to make your own and even with our stock of pre-made coils with wicks, you will want to experiment and find the set up that works best for you, length of wicking for example.

    Please do take great care when installing your coils and do a lot of research on how to do anything with a rebuildable atomizer of any kind, use youtube, the forums and networks out there to find the answers, tips and tricks, there are some amazing and generous people out there and we will of course answer any questions you have and offer our guidance on what works best for us with The A7 MINI Rebuildable.

Average Customer Review: 4.5 of 5 | Total Reviews: 3 . Write a review


  0 of 0 people found the following review helpful:
 
Love it... May 7, 2013
Reviewer: Rolf Katholnigg from Roswell, GA United States  
I really love it! It leaves you enough room for a few more drops than your standard atty. Due to being metal, you don't have to worry about juices killing your tank either. In addition, you'll get the real flavor of the juice you're utilizing. Of course, you'll have to break it in accordingly. A little bit more air flow would be nice IMO.

I'm thinking of getting 1 or 2 more!

Would I recommend it to my friends? Absolutely!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Not for an Ali'i April 11, 2013
Reviewer: Justin Turner from Chandler, AZ United States  
Got it last night. Great looking. Good build for the money. After reading reviews of Reo mini owners saying they liked it, I was hopeful this would work on my Ali'i. While it is small enough to fit in the juice cup, the Ali'i has a metal juice tube designed to go inside an unsealed atomizer and shoot juice inside. The A7 mini will fit on an ali'i and fire, but the juice tube seals off all air flow. If I remove my juice bottle I can get enough air through the tube to vape. But now I've converted my feeder into a direct dripper.

I can't speak to much beyond the looks of the device. But the price is great. You get the device and three coils for about the same as you would pay for three attys. Not sure why a flat head screwdriver is included since the screws on the mini are Philips. That is indicative of the device overall - not much paying attention to details. For example, the main body threads feel a little rough. Given the price I don't expect more.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
Great product February 21, 2013
Reviewer: Tom Lewis from Ogden, UT United States  
This is the best RBA I've used to date. It worked perfect right out of the box.

Was this review helpful to you?


Browse for more products in the same category as this item:

Rebuildables/Tanks