ATTENTION

The products sold on the EmpireMods website are intended for legal adults ONLY.

By agreeing to these terms, you certify that you are of legal smoking age or at least 21 years of age if you reside in New York City.







Subscribe to our newsletter:


















  Home > Rebuildables/Tanks >

  A7 Stainless Steel Rebuildable Atomizer



 
A7 Stainless Steel Rebuildable Atomizer
Our Price: $19.99
Sale Price: $16.99


Availability: Usually Ships in 24 Hours
Product Code: REBA7
Qty:

Description
 

A7 Stainless Steel Rebuildable Atomizer

The A7 Stainless Steel Rebuildable Atomizer comes with a standard 510 native connection. The A7 features a removable coil and wick held by 2 screws making it very easy to dismantle and rebuild with ease.
The A7 is designed for dripping and has great flavor and vapor production utilizing a single coil masked with 3 individual wicks. This Rebuildable Atomizer comes fully assembled with a 2.4ohm coil and plastic 510/901 drip tip is also included. You can use most 510/901 style drips tip in conjunction with this rebuildable. The air is drawn from the bottom (not the side) of the 510 connection similiar to most standard atomizers in the market today. Please note that the A7 has a adjustable center pin. If you see that your unit will not fire then you will need to adjust the center pin outwards to make a solid contact. (Available in Stainless finish)
Info
  • While this is an accessory for the advanced user, we do have 1.8, 2.0 and 2.4ohm ready made coils with wicks already made and available for simple installation and immediate use. First trim off the excess wire and wicking to the length that works for you, simply loosen the two screws on the top of the posts, slide the coil ends through each of the side holes on the posts, get the coil as close to the posts without it touching either of them, then tighten the screws. Thread the middle tube with draw hole onto the base with coil attached then do the same with the top drip tip piece. You can now thread onto your device. For first use, we recommend saturating the wick and coil in juice so at least 7 drops of your choice of liquid. Put your drip tip on in the top and vape.

    You can source your own wire for coils and wicking material to make your own and even with our stock of pre-made coils with wicks, you will want to experiment and find the set up that works best for you, length of wicking for example.

    Please do take great care when installing your coils and do a lot of research on how to do anything with a rebuildable atomizer of any kind, use youtube, the forums and networks out there to find the answers, tips and tricks, there are some amazing and generous people out there and we will of course answer any questions you have and offer our guidance on what works best for us with The A7 Rebuildable.


Average Customer Review: 5 of 5 | Total Reviews: 8 . Write a review


  2 of 3 people found the following review helpful:
 
Finally !! An RBA that easily fits deep connectors January 29, 2013
Reviewer: Karen from Twentynine Palms, CA United States  
I got my first A7's today.  First impression is excellent.  I can use these on everything I own that is 510, they will fire on all my finicky devices without giving me fits and they vape very well.  Great vapor production and once the coil has seasoned a bit I think the taste will be outstanding right now it's great.  

I love that the air holes are at the bottom and it won't leak sitting around, and that I can lay it down in my car seat if I need to.  The pin is easily adjusted in or out, the well is a nice size and it looks like it will be easy to rebuild even with my fat fingers.

Love the adjustable draw, I like my vape tight not airy, and there are no gaps showing between device and atty which gives a nice made for it look.

These come with a nice little screwdriver in the package.  I bought four.  I am going to buy more and put them away for down the road.  This is a great 510 dripping atty.



Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
Exelent Device January 8, 2013
Reviewer: CAV from United States  
My 1st RBA was a phoenix clone which is a dripping device similar to this one. If I had it to do all over again I would have definitely taken this device over the phoenix clone. It's not that the phoenix was a bad device, I really like it. This RBA is just better. The A7 is a very simple to build and simple to use device. I didn't like the wick and coil that it came with so I made a SS mesh wick and had it on the A7 in a matter of seconds. The posts are spaced well and the holes are large so it was a breeze compared to the phoenix. What I like most about the A7 is the air flow, it is by far better than any of the other RBAs I've tried. To top it all off it was only $20. I had to wait for them to get more in stock but the wait was worth it. Whether you're new to RBAs or a veteran I think you will be very happy with the A7.

Was this review helpful to you?

  4 of 4 people found the following review helpful:
 
a must for the rebuildable crowd November 8, 2012
Reviewer: Dominicanto on ECF from New York, NY United States  
Rebuilding is a breeze thanks to the spacing between posts; can adjust the posts (and remove them for cleaning); all stainless steel design; looks good; price; an adjustable positive post; air hole at the bottom (can be left on its side); and it can hold 10+ drops. Can't judge flavor and throat hit as that's a result of your own wick/coil design and your juice. Vapor can be great, or, not and that usually has to do with airflow. You can adjust that positive post so that those airholes take in more or less air which will affect both vapor and draw. Make sure your coil sits directly above the air hole in the drip well, too. One drawback is that the vapor can feel a little cool due to the length of the body, but applying the right amount of voltage to it and limiting air flow can help. Also, be careful to drip along the sides of the body and not directly down the center or juice can go inside the airhole and cause leakage as it exits down the positive post. Great rebuildable.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
A7 Stainless Rebuildable October 19, 2012
Reviewer: Amanda from Canton, GA United States  
I agree with the others, this rebuildable atomizer is pretty much perfect.  It's a great price, it's stainless steel, I can drip in it, but it holds a lot of juice, and it's easy to rebuild in several different configurations.  Love it.

Was this review helpful to you?

  4 of 4 people found the following review helpful:
 
Looking for a rebuildable? This is the one to get. October 5, 2012
Reviewer: Mark Hellman from Mandan, ND United States  
The bottom air feed gives this rebuildable superior taste over the other commonly-available rebuildables that draw in air from a hole on the side. There's also a bit more room to work in the a7, so putting a new coil in is a bit easier than the phoenix, phoenix clone, etc.

Out of all the rebuildables I own (phoenix, phoenix clone, rainbow, fatty v2, penelope, and a couple of home-made units) this is the easiest to rebuild. Flavor and vapor are on par with the penelope, without having to mess with non-resistive wire.

If you only buy one rebuildable, this is the one to get.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Rebuildables/Tanks