ATTENTION

The products sold on the EmpireMods website are intended for legal adults ONLY.

By agreeing to these terms, you certify that you are of legal smoking age or at least 18 years old.







Subscribe to our newsletter:


















  Home > Empire Drip Shields >

  Empire HEX Drip Shields



 
Alternative Views:


Empire HEX Drip Shields™
Our Price: $12.99


Availability: Subject to availability
Product Code: EM901HEX


Select Color:
  
Click to view another Select Cut

Select Cut*:
  

Qty:  
Description
 

The Special Hex Edition Drip Shield™


Please note that all Cut Drip Shields™ are Re-Cut by hand and some may slightly differ from one to the next. Every Drip Shield™ made is unique in its own way!!!

Empire HEX Drip Shield

This Special Hex Edition of the Empire Drip Shield™ works the same as the existing lines of Drip Shields with simply the addition of a different aesthetic. Another way of expressing yourself through your vaping accessory, Empiremods brings you the Hexagonal Drip Shield™ in different styles and cuts.

The Empire Drip Shield™ is a USA made PV accessory. Machined and hand crafted from high quality aircraft grade aluminum, these have been thoroughly beta tested for 8 months prior to launch here to assure that you are receiving a product that has been fully tested and monitored before bringing them to the market. The Drip Shield™ designed purpose is to keep the 901 atomizer from leaking, removing the necessity to carry paper towels with you for wiping away constant leakage. No adapter or any other accessory is needed with a 901 atomizer, simply slide the Drip Shield™ over the atomizer and you're good to go on most 901 connected/native devices.
Info
  • INFORMATION

    While originally designed for the 901 atomizer and The Empire PV MOD, the Drip Shield™ will also work with 510 atomizers and even (306 with delrin XL drip tip) as well. Using a Separately sold thread adapter (510-901 or 901-510 for example), you simply slide the Drip Shield™ over the atomizer until it covers the connection between atomizer and adapter and that's it. On a device/accessory where the connection between atomizer and battery is of the same diameter, an adapter may not be necessary. Empiremods also carries a (510-510) adapter. This adapter gives it the height and clearance it needs to work effectively on most all recessed 510 native device connections.

    BENEFITS USING DRIP SHIELD™

    *Prevents the 901 atomizers from leaking. Also works with 510 & (306 with delrin XL fitted drip tip) and proper adapter.

    *Works as a heat sink. By drawing fresh air in through the two tiny holes located at the top of the shield, use of the Drip Shield™ will keep your atomizer cool which results in the prolonged life of atomizers.

    *Tighter draw. The two tiny holes in the top of the Drip Shield™ also serve to give a tighter draw, giving you a nice, smooth and less-airy pull with more vapor production!

    Our Aim is for everyone to be able to use the Drip Shield™ as successfully as it has been used prior to launch here at EmpireMods.com As such we will give as much info/instructions as possible to ensure customer and vaping satisfaction.

    INSTRUCTIONS

    When you first get your Drip Shield™ it is best to wash off any access polish, metal or dust from shipping ect. This is done here before going out but as with drip tips, it's always best to clean them yourself after receiving and before first using them. Make sure you dry them completely. When replacing the Drip Shield™, ensure that the atomizer and shield are completely dry before sliding back over your atomizer. This ensures the 2 o-rings inside form a very good seal and will not move unless you purposely wish it to.

    (If the Drip Shield™ is not going on smoothly to atomizer and seems too tight, add a drop of your e-liquid to the o-rings inside Drip Shield™ and slide on with ease.
    )

    (If you find the default draw via the two holes on your drip shield are not to your personal preference, you can adjust them very easily. Simply use a pin, like that of a safety pin, push into one of the holes and gently move the pin around to widen the hole a little. Try the draw and if still not to your liking, do the same with the second hole, then further enlarge each one to your personal preference if needed.)


    When using a 901 atomizer you need to simply slide Drip Shield™ over atomizer already attached to your PV device, making sure that 2 tiny laser holes on Drip Shield™ are on the top part of atomizer towards the mouthpiece, drip your favorite E-Liquid/Juice of choice into your atomizer & Vape away!

    *Using Empire Drip Shield On 510 or 306 (delrin XL drip tip fitted) Atomizers.

    The Empire Drip Shield™ was built to stop the leaking of 901 atomizers, but with use of separately sold thread adapters, they can work for 510 or (306 with delrin XL drip tip fitted) atomizers. The key to make this work is the adapters let the liquid travel into the Drip Shields through the 4 tiny vent cuts where adapter meets bottom of atomizer and liquids are then collected. The separately sold (510-510) adapter we sell will make it work for 510/306 on most all devices as well. On a device/accessory where the connection between atomizer and battery is of the same diameter, an adapter may not be necessary.


    *Disassembling your atty/adapter/Drip Shield™ set up on a 510 device

    As the Drip Shield™ is a 901 atty designed accessory, using it with 510/306 atomizers requires the use of an additional 510-510 adapter in most situations in order to have it perform the same function as it does with a 901 atomizer. Please take care when removing you Drip Shield™ from your device. While it should never require excessive force to remove a shield, should the o-rings inside be dry and or the connection between atty and adapter be loose on a 510/306 set up and a space be left between the two, this could lead to the o-ring catching in that space and therefor requiring a little force to pull the shield free. Should it feel like it is going to require a great deal of effort to remove it, make sure to thread it onto a solid device with a standard connector on it before pulling the drip shield off as some devices use their own and are made from softer metals than that of attys/adapters. Excessive force on such soft metal threads could lead to them being stripped partially or completely and would damage the threads of the device.

    *Care

    Maintenance of your Drip Shield™ is as simple as cleaning it, soap & water and tissue to dry. We recommend cleaning 1-2 times a week or if Drip Shield™ is loaded with juice. A dry pull without activating your PV can draw any excess juice which has collected in the Drip Shield™ or bottom of the atomizer back up and into it, resulting in less waste of juice. Simple maintenance will help you get the most out of your atomizers and Drip Shield™!

    Should you need any help with any of our products, please contact us anytime at Sales@Empiremods.com. We are here to help the community more then anything else and ensure that we all get the most out of our vaping lives together.


Average Customer Review: 5 of 5 | Total Reviews: 3 . Write a review

Additional Accessories...
901-510 Adapter (Unsealed)
Our Price: $2.99

Add
510-901 Adapter
Our Price: $2.99

Add
510-510 Adapter (Sealed)
Our Price: $2.99

Add


  0 of 0 people found the following review helpful:
 
Love it February 23, 2012
Reviewer: Ken from orleans, VT United States  
Ordered the hex drip shield in black and 510 cartomizers. They threw in a 510 to 510 extension, thanks! I am constantly over dripping. I over filled one just to try it and no leaks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Pricey But Worth the money February 22, 2012
Reviewer: Sean Mahoney from Deptford, NJ United States  
They have a cheaper delrin drip shield on here that I tried out before I bought this one, just to see if it was worth the money. Best 6 bucks I ever spent. I bought this one for looks, I got the hex #1 in Black. I have it on a black T-rex with a silver anodized drip tip, looks slick, kind of reminds me of a black and white checker board lol. I'm an over dripper so I think these things are amazing. Take a couple pulls before each hit and all the excess liquid will get sucked back in to the atty. Definantly worth the money.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Awesome drip shield December 15, 2011
Reviewer: Panky from FL  
This thing works perfectly and I love the shape. I don't even like how my 510 attys hit without one of these on it.

Was this review helpful to you?


Browse for more products in the same category as this item:

Empire Drip Shields