You are here: Home > Rebuildables/Tanks
Sort By:
Page of 1
IGO-L Rebuildable Atomizer


IGO-L Rebuildable Atomizer

New and now added to our rebuildable lineup the IGO-L makes its way to EmpireMods! Made from Stainless Steel with an easily removable top and completely open work area for assembling your coils to the posts. Comes with standard 510 connection, spare o-rings, screws and enough wick and wire to make your first coil on it. A brilliant, simple, medium size in proportions rebuildable atomizer.
These stand bigger then the IGO-S and have some excellent user feedback we took into consideration and brought them in.

Our Price: $12.99
IGO-W Rebuildable Dripping Atomizer


IGO-W Rebuildable Dripping Atomizer

The new IGO-W Rebuidable Atomizer features a dual to quad coil set up posts. Made from high grade surgical stainless steel, the IGO-W is sure to stand the test of build quality. The IGO-W comes with everything needed to get you set up on your first coil. Included is wick, spare screw and o-rings. The IGO-W is built for dripping and has 2 holes on the side housing for air to breath through the coils from both ends giving vast amounts of vapor production. Bottom sealed 510 center pin will ensure no leaking from the bottom. This rebuildable is easy to work on due to the size between the posts.

Please note this is a advanced user rebuildable atomizer, no RBA should be used with anything other than IMR batteries and is intended for those with some experience in using rebuildables or who have done a lot of research before trying.

Our Price: $12.99
IGO-W5 Rebuildable Dripping Atomizer


IGO-W5 Rebuildable Dripping Atomizer

The IGO-W5 from Youde. The new IGO-W5 is an upgraded version of the popular IGO-W. It features a 3 hole post for easy single/dual coil builds. The main feature of the new IGO-W5 is the 22mm diameter and deep dish design fitting flush on many Mods/PV's in the market today. It now has a larger volume top cap and holes for even more extreme vapor production. Comes in full stainless steel with silica wick, kanthal wires, and extra o-rings. Please note, this is not for use with anything less than IMR batteries and is for those who have properly researched how to use it or those already experienced in doing so.
Please note this is a advanced user rebuildable atomizer, no RBA should be used with anything other than IMR batteries and is intended for those with some experience in using rebuildables or who have done a lot of research before trying. (Pre-built Coils pictured not included)

  • Full Stainless Steel
  • 22mm Diameter
  • Triple Post
  • Zero Voltage Drop
  • Deep Dish Design
  • Precise Craftsmanship

Our Price: $27.99
IGO-W5 Crest Cap


IGO-W5 Crest Cap

The Crest Cap is a polished AFC (Airflow Control) cap made specially for the IGO-W5. It allows users to control the airflow of the IGO-W5 at will and comes in a 2 piece design.

  • 304 Food Grade Stainless Steel
  • 22mm Base 23mm Top
  • Air Flow Control
  • Flared Heat Fins
  • Easy To Access For Juice Refill
  • 2-piece Design

Our Price: $19.99
Infinite CLT V3 RDA


Infinite CLT V3 RDA

The Infinite CLT V3 is the newest version of Infnite's Authentic Rebuildable Atomizer. Like it's predecessors the CLT V3 combines many features from other popular atomizers into one awesome RDA. The CLT V3 comes in a 3 piece stainless steel design and comes with 3 interchangeable drip tips that each allow for different draws. (Large Derlin, Medium Derlin and Stainless Steel Drip Tip.) The CLT V3 has taken the "Cyclops" style air holes from the Cartel Stillare and many other popular RDA's after it and combined it with the unique triple staggered design fro the Mutation X RDA. The airflow is adjustable with the ability to open as much as 6 air holes. This new airflow design combined with the wide bore drip tip cap allows for a massive amount of vapor production. The CLT V3 has a 3 post design with large holes for your coils. The negative posts on the CLT V3 are milled right out of the deck which creates better contact, and adds to the vapor production. (A design which has been borrowed from other leading RDA's such as the Hobo and Plume Veil.) In addition the contacts on the CLT V3 are made from brass for great conductivity and even more increased vapor production.

(Available In Black Or Stainless Steel Finish)

Our Price: $39.99
Triangle Stainless Steel Rebuildable Atomizer


Triangle Stainless Steel Rebuildable Atomizer

The Triangle Stainless Steel Rebuildable Atomizer is the newest 510 style rebuildable to our site. It features a dual coil parallel style post in the form of a Triangle hence the name. Comes standard installed with 2 - 3.0ohm coils resulting in a 1.5ohm atomizer. There is a pin sized hole on the side of the lower assembly which draws air through the coil giving vasts amounts of vapor production. The bottom of the connection is sealed so it will not work for bottom feeder mods and should used strictly for dripping. The Triangle comes with a center spike attachment so you can use use 510-T cartridges as well. Any 510/901 style drip tip will work on the Triangle, simply remove screw attachment and you can drip directly into the coil. The Triangle also has a splash guard to prevent liquids from spitting back when dripping. Black plastic drip tip is included.

Our Price: $12.99
Super Low Special!!! $8.99
Triangle Rebuildable Coil And Wick (2 Pack)


Triangle Rebuildable Coil And Wick (2 Pack)

The Triangle Rebuildable Coil And Wick comes complete with 2 coil/wicks ready to go. All you need to install these coils is a pair of scissors and a small eyeglass screwdriver. They come in 3.0ohm range and for use in dual coil mode dividing it into a 1.5ohm dual coil atomizer. The fiber wick installed and coil can be trimmed down in size to your preference.

Our Price: $1.99
Smoktech Dripper RDA


Smoktech Dripper RDA

The Smoktech Stainless Steel Dripper RDA is exactly what you think it is, a rebuildable dripper. Made of full stainless steel including a secure non removable drip tip to ensure you dont ever lse it, this is perfect for someone who wants to get into rebuilding for the first time. There's a 1 positive and 1 ground post, ideal for single-coil builds. Airflow has been improved over past RDAs, in that the airflow comes in from a hole in the side, instead of at the bottom of the deck. This also means reduced leaking. The top cap also features an integrated mouthpiece for a uniform look. The Dripper comes with a pre-made 1.8-ohm coil, but really shines when rebuilt with your own wick and wire.

Price is for one (1) Dripper RDA.

Our Price: $7.99
RDA Rebuildable Coil And Wick

RDA Rebuildable Coil And Wick

The Rebuildable Coil And Wick is made for the RDA Rebuildable Dripping Atomizer. These come standard in 1.7ohm and feature a single coil surrounding 8 wicks.

Our Price: $2.49
Kanger AeroTank Mini



Kanger AeroTank Mini


The all new AeroTank Mini is an all new designed tank that is proven to be the all-time favorite by many. The mini is a durable tank that also produces a blast of flavor. Instructions are included.

Features:

- Adjustable Airflow Control

- Replaceable pyrex tank

- Redesigned dual coils for longer durability and lasting flavor

- Bottom fed Coil

- 1.5ml juice Capacity

- Ego Threaded

Included in the kit:

- 1 x Kanger AeroTank Mini (Pyrex tank, top cap, bottom cap and Airflow control 510 base)

- 1 x Stainless tube

- 1 x Glass tube

- 1 x Drip tip

- 2 x New dual coil atomizer heads

Our Price: $27.99
Kanger AeroTank Mega



Kanger AeroTank Mega


The all new Aerotank Mega is another newly designed tank by Kanger. Holding a whopping 3.8ml of juice, this tank will satisfy any vaper’s needs. Instructions are included.

Features:

- Adjustable Airflow Control

- 3.8ml juice capacity!

- Replaceable Drip Tip

- High Grade Stainless Steel

Included in the kit:

- 1 x Kanger AeroTank Mega

- 1 x Stainless tube

- 1 x Pyrex Glass tube (installed)

- 1 x 510 drip tip

- 2 x New dual coil atomizer heads

Our Price: $37.99
New Kanger Dual Coil Atomizer Head


New Kanger Dual Coil Atomizer Head

These are the new updated coils that are produced by Kangertech. They fit many of the Kanger Dual Coil tanks listed below. Now available in Sub Ohm for advanced Mod Users!!!

Compatible with:

- Aerotank, Aerotank Mini, Aerotank Mega, Aerotank V2, Aerotank Giant, Aerotank Mow Protank 3, Mini Protank 3, EVOD Glass, EVOD 2, T3D


Available in:

- Dual Coil 2.0ohms

- Dual Coil 1.5ohms

- Single Sub Ohm .08ohms

"Comes 1pcs single unit per order"


Our Price: $2.99
Aspire Nautilus BDC (Adjustable Airflow Control Tank)


Aspire Nautilus BDC (Adjustable Airflow Control Tank)

The Aspire Nautilus BDC Adjustable Airflow Control Tank is made with the newest bottom dual coil system and an exclusive adjustable airflow design. This is the newest creation from Aspire and the 510 threaded tank is made of full stainless steel and Pyrex. This tank performs great with no leaking and has very good airflow control dial
that makes vaping a breeze! (The coils included are replaceable and only will work with the Aspire Nautilus tank system)

The Aspire Nautilus Adjustable Airflow BDC Tank comes with

1x Full Aspire Nautilus Tank (1.6ohm BDC Installed)
1X Replaceable 510 Stainless Steel Drip Tip
1x Extra Aspire Nautilus BDC Coil at 1.8ohm
1x eGo Thread Adapter
1x User Manual.

Our Price: $34.99
Aspire Nautilus BDC Replacement Coil


Aspire Nautilus BDC Replacement Coil

These replacement heads are designed to fit the Aspire Nautilus BDC (Adjustable Airflow Control Tank)

(This product only works with the Aspire Nautilus. Available in 1.6ohm or 1.8ohm and includes 1pcs per order)

Our Price: $3.49
Aspire Nautilus Glass Replacement


Aspire Nautilus Glass Replacement

The Glass Replacement Tank for the Nautilus tank by Aspire. No need to purchase a new tank because your glass broke, just replace it.

Features:

-Glass Replacement Tank for the Nautilus by Aspire

(This product only works with the Aspire Nautilus Tank System)

Our Price: $7.99
Aspire Nautilus Tank Hollow Mesh Replacement


Aspire Nautilus Tank Hollow Mesh Replacement

A beautiful, yet durable upgrade for the Nautilus Tank by Aspire. Feature a stainless steel mesh design around the replacement tank. A beautiful design for the Nautilus tank.

Features:

-Hollow Mesh Cover with the replacement glass tank for the Nautilus Tank by Aspire

(This product only works with the Aspire Nautilus Tank System)

Our Price: $12.99
New!!! Aspire Nautilus Mini BVC (Adjustable Airflow Control Tank)


Aspire Nautilus Mini BVC (Adjustable Airflow Control Tank)

The Nautilus Mini is the next generation of tank systems. Made of stainless steel and Pyrex glass, the Nautilus Mini uses the Aspire “BVC” (Bottom Vertical Coil) atomizer technology. This new technology is designed to last longer while still giving users the purest and cleanest taste from e-liquids. The Nautilus Mini includes an improved four-port adjustable airflow system that is both user friendly and reliable. This unique four-port system allows the user to adjust the draw, warmth of vapor, and amount of vapor produced. The Nautilus Mini design also makes it easy to carry, install, and refill.
(The coils included are replaceable and only will work with the Aspire Nautilus/Nautilus Mini tank systems)

The Aspire Nautilus Mini Adjustable Airflow BVC Tank comes with

1x Full Aspire Nautilus Mini BVC Tank (1.6ohm BDC Installed)
1x Replaceable 510 Stainless Steel Drip Tip
1x Extra Aspire Nautilus BVC Coil at 1.8ohm
1x eGo Thread Adapter
1x User Manual

Our Price: $29.99
Aspire Nautilus Mini Replacement Tank with "T" Window Sleeve


Aspire Nautilus Mini Replacement Tank with "T" Window Sleeve

The Aspire Nautilus Mini Replacement Tank with "T" Window Sleeve is made of stainless steel and Pyrex glass. This sleeve will add protection to your Nautilus Mini Tank on the outside while remaining clean tasting on the inside due to its inner glass design. The stainless steel casing has a "T" style window to view your remaining liquid in your tank
(This replacement sleeve only will work with the Aspire Nautilus Mini tank system)

Our Price: $12.99
New!!! Aspire Atlantis BVC (Adjustable Airflow Control Tank)


Aspire Atlantis BVC (Adjustable Airflow Control Tank)

The Aspire Atlantis is the next generation of sun ohm tank systems. Aspire's Atlantis has raised the bar to new heights. This next generation tank system brings improved adjustable airflow and Sub Ohm coils that provides performance similar to even the best rebuildable atomizer. By enhancing Aspire's Bottom Vertical Coil design Vapers will experience better taste and vapor production. Aspire's Atlantis Tank design is easy to carry, install, and refill. Aspire... the trusted name in Personal Vaporizers.
Aspire's Atlantis has raised the bar to new heights. This next generation tank system brings improved adjustable airflow and Sub Ohm coils that provides performance similar to even the best rebuildable atomizer. By enhancing Aspire's Bottom Vertical Coil design Vapers will experience better taste and vapor production. Aspire's Atlantis Tank design is easy to carry, install, and refill. Aspire... the trusted name in Personal Vaporizers. - See more at: http://www.aspirecig.com/products/Atlantis/atlant...
(The coils included are replaceable and only will work with the Aspire Atlantis tank system)

The Aspire Atlantis Adjustable Airflow BVC Tank comes with

1x Full Aspire Atlantis BVC 2.0ml Tank (.5ohm BVC Installed)
1x Replaceable 510 Stainless Steel Drip Tip
1x Extra Aspire Nautilus BVC Coil at .7ohm
1x Replacement glass tank


Our Price: $44.99
Sale Price: $39.99
Tank Airflow Controller


Tank Airflow Controller

This device is used for giving you the option to control your airflow to your tank on 510 threaded devices. All that is needed to do is simply screw on your tank to the controller, then on to your device. Once the controller is installed you can now adjust the center control ring to your draw you desire.

Our Price: $2.99
3-In-1 Keyring Mini Screwdriver


3-In-1 Keyring Mini Screwdriver


The 3-In-1 Keyring Mini Screwdriver is the perfect tool for changing out your rebuildable wires/wicks. Comes with keychain connector for easy convenient carrying. Weight: 6 grams. Size: 5.8*2.3*0.4 cm

Our Price: $2.99
10 Ft. Kanthal A-1


10 Ft. Kanthal A-1

Kanthal wire - Used for making coils for rebuildable atomizers.

*Resistance - The more wire you have, the greater the resistance. The factors that affect resistance are:

Diameter: The thinner the wire (higher gauge number), the higher the resistance per foot. The thicker the wire (lower gauge number), the lower the resistance.

Length: The longer the wire, the higher the overall resistance. The shorter the wire, the lower the overall resistance.

Our Price: $1.99
10 Ft. Nichrome 60


10 Ft. Nichrome 60

Nichrome 60 wire - Used for making coils for rebuildable atomizers.

*Resistance - The more wire you have, the greater the resistance. The factors that affect resistance are:

Diameter: The thinner the wire (higher gauge number), the higher the resistance per foot. The thicker the wire (lower gauge number), the lower the resistance.

Length: The longer the wire, the higher the overall resistance. The shorter the wire, the lower the overall resistance.

Our Price: $1.99
Stainless Steel Mesh 45mm x 45mm


Stainless Steel Mesh 45mm x 45mm

Pre-Cut Stainless Steel Mesh 316L 45mm x 45mm size. Available in optional 400, 450 & 500.  Used for rebuildable tank and genesis style atomizers.

Our Price: $0.99
Silica Wick 12"


Silica Wick 12"

The Silica Wick is used for wrapping coils for rebuildable atomizers and tanks. Comes with 12" inches per order and size is available in 2.0mm and 3.0mm.

Our Price: $0.99
Ekowool Silica Wick 12"


Ekowool Silica Wick

Ekowool is used for wrapping coils for rebuildable atomizers and tanks. The Ekowool comes with 12" inches per order and size is available in 1.0mm, 2.0mm, 2.5mm and 3.0mm. Excellent absorption with Hollow center.

Softer and more compressible than silica strand core.
Natural undyed organic cotton core for superior flavor and capillary action.

***Boiling in water before using is recommended.

Our Price: $1.99