|
SmokTech 510 XL Dual Coil Cartomizers 1.5ohm
|
|
|
|
SmokTech 510 XL Dual Coil Cartomizers 1.5ohm
The SmokTech 510 XL Dual coil 1.5ohm Cartomizers come in a pack of 5pcs. They can be filled with around 25 drop of liquid and used at 3.7v or 5-6v as well. They also can be hole punched and used on items such as the DCT MAP Tank. Great filament and no harsh burning tastes when properly filled and kept wet. We find that they have nice amounts of flavor and vapor production and work on Mods with 650mah or better. Can also be used with Empire Drip Shield™ (will be tight fit) and proper atomizer adapters. (Stainless Steel Finish)
*Large XL size Cartomizers
|
|
|
Smoktech 510 XL Single Coil Cartomizers 1.7ohm
|
|
|
|
Smoktech 510 XL Single Coil Cartomizers 1.7ohm
Using a single coil rather than a dual
coil and at the lowest ohm available in a cartomizer currently, these LR
1.7ohm cartomizers produce a fantastic vape for cartomizer users and
also a great alternative to the dual coils for vaping on the eGo or at
3.7v. These are non-prefilled so are ready to be filled with your juice
of choice as soon as you get them, simply remove the cap on top, fill
and vape! (Stainless Steel Finish)
*Large XL size Cartomizers
|
|
|
|
Smoktech 510 Single Coil Cartomizers 1.7ohm
|
|
|
|
Smoktech 510 Single Coil Cartomizers 1.7ohm
Using a single coil rather than a dual coil and at the lowest ohm available in a cartomizer currently, these LR 1.7ohm cartomizers produce a fantastic vape for cartomizer users and also a great alternative to the dual coils for vaping on the eGo or at 3.7v. These are non-prefilled so are ready to be filled with your juice of choice as soon as you get them, simply remove the cap on top, fill and vape! (Stainless Steel Finish)
*Standard X regular size Cartomizers
|
|
|
|
Smoktech 510 Single Coil Shorty Cartomizers 1.7ohm
|
|
|
|
Smoktech 510 Single Coil Shorty Cartomizers 1.7ohm
New at EmpireMods our shortest available cartomizer yet! These measure 26mm in length and offer a warm flavorful vape. Holds approximately 15 drop of liquid. Using a single coil rather than a dual coil and at the lowest ohm available in a cartomizer currently, these LR 1.7ohm cartomizers produce a fantastic vape for cartomizer users and also a great alternative to the dual coils for vaping on the eGo or at 3.7v. These are non-prefilled so are ready to be filled with your juice of choice as soon as you get them, simply remove the cap on top, fill and vape! (Stainless Steel Finish)
*Extra Small 26mm size Cartomizers
|
|
|
|
Smoktech 510 XL Single Coil Cartomizers 2.0ohm
|
|
|
|
Smoktech 510 XL Single Coil Cartomizers 2.0ohm
These our highest ohm Smoktech cartomizers we carry. They are a touch cooler the our 1.7ohm cartomizers. Using a single coil rather than a dual
coil these LR 2.0ohm cartomizers produce a fantastic vape for cartomizer users and
also a great alternative to the hotter dual coils for vaping on any 3.7v 510 threaded device. These are non-prefilled so are ready to be filled with your juice
of choice as soon as you get them, simply remove the cap on top, fill
and vape! (Stainless Steel Finish)
*Large XL size Cartomizers
|
|
|
|
EmpireMods LR901 2.0ohm Cartomizer
|
|
|
|
EmpireMods LR901 2.0ohm Cartomizers
Empiremods brings you the new LR901 2.0ohm Cartomizer. Same bottom thread connection as our 901 atomizers, the new 901 cartomizer will hold around 25-30 drops of liquid. You can even use a 510/901 drip tip as well as our Empire Drip Shield™ to stop any over drip leaking out of the side vent hole. These 901 cartomizers have plastic cap on top that can be removed to fill with ease. A great quality cartomizer made by SLB. (Stainless Steel Finish)
*Standard X regular size Cartomizers
|
|
|
|
Cartomizer Puncher
|
|
|
|
Cartomizer Puncher
This tool will allow you to punch holes into your cartomizers for use with DCT tanks. Features a lobster claw clasp and can be attached to your key chain. Very easy to use, simply slide your cartomizer into the ring to your desired area to be punched and then turn the screw until the hole is made.
|
|
|
